PPR Nano-Antibacterial Pipe

Nano-Antibacterial PPR Pipe through a special process and equipment, multi-layer co-extruded, low-temperature high-speed production of high-performance pipe, have the following characteristics:
1. Linear expansion coefficient of only ordinary PP-R for about 20-30%; completely solve the problem of plastic pipe stretching.
2. Pipe rigidity increased, to prevent the pipe sagging phenomenon, while also reducing the density and number of fixed support points, thereby reducing the cost of the project synthesis.
3. Pressure level higher power under the tremor in normal design life longer.
4. High temperature performance, better energy-saving effect of significantly reducing consumption; FP / PP-R used in hot water systems, the normal use temperature of up to 95-100 ℃, namely, to increase the use of medium temperature, but also reduce the thermal insulation materials thickness, its comprehensive and lower cost.
5. Water flow large: at the same level of pressure conditions, FP / PP-R pipe wall thickness of thin, increase the diameter of the pipe, thus increasing the water flow rate (an increase of 20%).
6. Solved the problem of pipeline gas permeable, direct contact with the water table within the Health and non-toxic, sealing is good, will not form sphagnum moss. Glass fiber reinforced FP / PP-R pipe middle layer of the composition, completely isolated from the outside air does not penetrate inside the tubes, thereby inhibiting the growth of algae, fresh water to maintain purity.